Interfaces/Ports Cisco 2811-SRST/K9 Multiservice Router |
| Interfaces/Ports |
2 x 10/100Base-TX LAN |
| Interfaces/Ports Details |
· 2 x 10/100Base-TX LAN · 1 x Auxiliary Management · 1 x Console Management · 2 x USB |
| Media & Performance Cisco 2811-SRST/K9 Multiservice Router |
| Data Transfer Rate |
· 10Mbps Ethernet · 100Mbps Fast Ethernet · Up to 115.2Kbps Console · Up to 115.2Kbps Auxiliary |
| I/O Expansions Cisco 2811-SRST/K9 Multiservice Router |
| Expansion Slots |
9 x Expansion Slot(s) |
| Slot Details |
· 2 x AIM Internal · 4 x Expansion Slot(s) Internal · 1 x NME Internal · 2 x PVDM Internal |
| Modules |
1 x PVDM2-16 Packet Voice/Fax DSP Module |
Management & Protocols Cisco 2811-SRST/K9 Multiservice Router |
| Management |
· Cisco Router and Security Device Manager (SDM) · Simple Network Management Protocol (SNMP) · Cisco CallManager Express ( CME ) |
| Protocols |
· TCP /IP · SNMP · SSH v1 · VoIP · VoFR · ATM · VoATM · H.323 · MGCP · RTP |
| Operating System |
· Cisco 2800 IOS SP SERVICES |
| Security |
· Multiprotocol Label Switching (MPLS) VPN support · Network Admissions Control (NAC) · Secure Shell (SSH) · Easy VPN remote and server support VPN Hardware Acceleration (on motherboard): · DES , 3 DES , AES 128, AES 192, and AES 256 </P< li> |
Memory Cisco 2811-SRST/K9 Multiservice Router |
| Memory |
· 256MB DRAM Installed · 760MB DRAM Maximum · 64MB Flash Installed · 256MB Flash Maximum |
| Power Description Cisco 2811-SRST/K9 Multiservice Router |
| Input Voltage |
100 V AC to 240 V AC Auto-ranging |
| Input Current |
· 2A @ 110V AC · 1A @ 230V AC |
| Frequency |
50 Hz or 60 Hz |
|
Environmental Conditions Cisco 2811-SRST/K9 Multiservice Router |
| Temperature |
· 0 °C to 40 °C Operating · -20 °C to 65 °C Non-operating |
| Humidity |
5% to 95% Non-condensing Operating |
| Physical Characteristics Cisco 2811-SRST/K9 Multiservice Router |
| Form Factor |
· 1U 19" Rack-mountable · 1U 23" Rack-mountable · Wall-mountable |
| Dimensions |
4.45cm Height x 43.81cm Width x 41.66cm Depth |
Miscellaneous Cisco 2811-SRST/K9 Multiservice Router |
| Package Contents |
· 2811 Router · Cisco 2800 IOS SP SERVICES · Feature Lic Survivable Remote Site Telephony up to 36 phones (FL-SRST-36) · Device manager for routers (ROUTER-SDM) · 16-Channel Packet Voice/Fax DSP Module (PVDM2-16) · 256MB DDR DRAM Memory factory default for the Cisco 2800 (MEM2800-256D-INC) · 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC) · Blank WAN Interface Card Panel (WIC-BLANK-PANEL) · Cisco 2800 and 3800 Series Blank network module panel (NM-28/38BLNK-PANEL) · Cisco 2811 AC power supply ( PWR -2811-AC) · Power Cord · RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management access · One pair of rack-mount brackets with screws for 19-inch racks · Cisco Product Registration Card · Cisco 2800 Series Regulatory Compliance and Safety Information document · Cisco Router and Security Device Manager (SDM) Quick Start Guide document · Cisco 2800 Series Integrated Services Routers Quick Start Guide |
| Additional Information |
Interface Card Slots: · Each slot can support HWIC, WIC, VIC, or VWIC type modules RPS: · External only, connector for RPS provided by default Operation Altitude (derate 1.5°C per 1000 ft): · 27.5°C @ 15 kft · 35°C @ 3km/10 kft · 40°C @ sea level |
| System Requirement |
· Minimum Cisco IOS Software release: 12.3(8)T |
| Certifications & Standards |
· IEEE 802.3: 10BASE-T · IEEE 802.3u: 100BASE-TX · USB 1.1 Safety: · UL 60950 · CAN/ CSA C22.2 No. 60950 · IEC 60950 · EN 60950-1 · AS/NZS 60950 Immunity: · EN300386 · EN55024/CISPR24 · EN50082-1 · EN61000-6-2 EMC : · FCC Part 15 · ICES-003 Class A · EN55022 Class A · CISPR22 Class A · AS/NZS 3548 Class A · VCCI Class A · EN 300386 · EN61000-3-3 · EN61000-3-2 TELCOM: · Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's |
|
Warranty Cisco 2811-SRST/K9 Multiservice Router |
| Standard Warranty |
90 Day(s) Limited |
Home 
The Cisco 2811 allows network managers to provide scalable analog and digital telephony without investing in a one-time solution, allowing enterprises greater control of their converged telephony needs. Using the voice and fax modules, the Cisco 2811 can be deployed for applications ranging from voice-over-IP (VoIP) and voice-over-Frame Relay (VoFR) transport to robust, centralized solutions using the Cisco Survivable Remote Site Telephony (SRST) solution or distributed call processing using Cisco Call Manager Express ( CME ). 
